Viper engine/tranny for sale or trade

Liu Kang · 02-22-2008, 07:06 AM

OK, a while back I was looking to buy a engine for my older mopar, I was going to either get a hemi or get a viper V10 and have it fitted into my mopar, well, I got the viper engine. I think that was a pretty poor mistake, now, I want a 426 hemi, so up for sale is my 93 complete viper motor with a ecu from a 95, it is complete with a six speed transmission and only 15K miles on it. Will trade for or twords a 426 hemi or a e-body shaker package, please email me at liukang187@yahoo.com
thanks
Dan

Liu Kang · 01-25-2009, 05:49 PM

Wow, very old post, but yes this is still for sale, will try to get picts and post it here soon,

Commando · 01-26-2009, 08:34 AM

Dan, How much are you looking to get for it?

Liu Kang · 01-26-2009, 06:45 PM

I paid $8,000 for it, I'll take $6,000 for it plus shipping or you can come and pick it up, I will take less if you don't take the tranny.

67 GTX · 01-26-2009, 06:56 PM

when was the last time it ran?

Liu Kang · 01-26-2009, 09:30 PM

I don't know, I never had it installed or ran, I got a 426 hemi for my challenger instead... so this just sat around till I got a hold of a hemi...

67 GTX · 01-27-2009, 08:16 PM

did you buy a crate hemi?

Liu Kang · 01-28-2009, 07:47 PM

nope, a new mopar block with Indy heads and parts..., I wanted to do the new suspension, brakes but keep the shaker look, don't think I could have pulled off the v10 with a shaker. But I think I might be able to do the 426 hemi with a viper six speed, dana 60, in a drop top, with new steering and suspension... money from this sale can help fund the project...

dartcuda · 02-06-2009, 04:23 AM

Ill trade the trany for a six pack setup

dartcuda · 02-06-2009, 04:25 AM

sorry I see you are going to use the trany

78D200 · 02-06-2009, 05:05 AM

That V10 and tranny would make my little 2wd dakota really go.

too bad money is ALWAYS a factor..... plus the little lady would kill me 10 times over.

Liu Kang · 02-09-2009, 09:11 PM

yea, I already have a six pack setup from a 69 and a half. That's going on to my 440 six pack challenger. I was thinking about buying a dodge ram without a engine/tranny and throwing this setup in it. That should be fun. I'll probably end up doing that since I don't think this will sell...

02-10-2009, 12:30 AM

hell throw it in a neon and tell everyone its all stock dodge... it would be the truth! t

Commando · 02-10-2009, 05:32 AM

Bob, that would be awesome, if I had the money I would do something like that, or put it in my jeep.

Liu Kang · 03-17-2009, 07:07 AM

anyone interested?

68 Sat · 03-17-2009, 07:26 AM

Can I drop that engine into a B Body 1968 Satellite? Are you interested in selling the tranny seperately?

Liu Kang · 04-07-2009, 09:40 AM

this is still for sale, not sure if it will fit into a B body but pretty sure it will, you may need to do some modifcations, I have seen them in E and B bodies.

08-18-2009, 06:38 PM

Quote:

Originally Posted by Liu Kang

I paid $8,000 for it, I'll take $6,000 for it plus shipping or you can come and pick it up, I will take less if you don't take the tranny.

72Satellite440 · 12-02-2010, 08:29 AM

Is this still available

01-25-2009, 05:49 PM	#2 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Wow, very old post, but yes this is still for sale, will try to get picts and post it here soon, __________________ liukang187@yahoo.com

01-26-2009, 06:45 PM	#4 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	I paid $8,000 for it, I'll take $6,000 for it plus shipping or you can come and pick it up, I will take less if you don't take the tranny. __________________ liukang187@yahoo.com

01-26-2009, 06:56 PM	#5 (permalink)
67 GTX Super Moderator Join Date: Jul 2008 Location: Brooklyn, N.Y. Posts: 6,190 Thanks: 1 Thanked 3 Times in 3 Posts	when was the last time it ran? __________________ 1967 Plymouth Belvedere GTX 440/4-Speed/Dana 60

01-26-2009, 09:30 PM	#6 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	I don't know, I never had it installed or ran, I got a 426 hemi for my challenger instead... so this just sat around till I got a hold of a hemi... __________________ liukang187@yahoo.com

01-27-2009, 08:16 PM	#7 (permalink)
67 GTX Super Moderator Join Date: Jul 2008 Location: Brooklyn, N.Y. Posts: 6,190 Thanks: 1 Thanked 3 Times in 3 Posts	did you buy a crate hemi? __________________ 1967 Plymouth Belvedere GTX 440/4-Speed/Dana 60

01-26-2009, 08:34 AM	#3 (permalink)
Commando Mopar Lover Join Date: Nov 2007 Location: New Jersey Posts: 935 Thanks: 0 Thanked 0 Times in 0 Posts	Dan, How much are you looking to get for it?

01-28-2009, 07:47 PM	#8 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	nope, a new mopar block with Indy heads and parts..., I wanted to do the new suspension, brakes but keep the shaker look, don't think I could have pulled off the v10 with a shaker. But I think I might be able to do the 426 hemi with a viper six speed, dana 60, in a drop top, with new steering and suspension... money from this sale can help fund the project... __________________ liukang187@yahoo.com

02-06-2009, 04:23 AM	#9 (permalink)
dartcuda Mopar Fan Join Date: Oct 2008 Location: malvern pa Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts	viper Ill trade the trany for a six pack setup __________________ 1967 barracuda fastback stickshift/ 500ci wedge indy heads str14 crossram manifold custom headers and hemi hood

02-06-2009, 04:25 AM	#10 (permalink)
dartcuda Mopar Fan Join Date: Oct 2008 Location: malvern pa Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts	viper sorry I see you are going to use the trany __________________ 1967 barracuda fastback stickshift/ 500ci wedge indy heads str14 crossram manifold custom headers and hemi hood

02-06-2009, 05:05 AM	#11 (permalink)
78D200 Fix it right the 1st time Join Date: Apr 2008 Location: Manchester, NH Posts: 7,594 Thanks: 7 Thanked 124 Times in 122 Posts	That V10 and tranny would make my little 2wd dakota really go. too bad money is ALWAYS a factor..... plus the little lady would kill me 10 times over. __________________ Tim and Heather (happily married) 06 Street Glide - cruiser

02-09-2009, 09:11 PM	#12 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	yea, I already have a six pack setup from a 69 and a half. That's going on to my 440 six pack challenger. I was thinking about buying a dodge ram without a engine/tranny and throwing this setup in it. That should be fun. I'll probably end up doing that since I don't think this will sell... __________________ liukang187@yahoo.com

02-10-2009, 12:30 AM	#13 (permalink)
66sportfury Guest Posts: n/a	hell throw it in a neon and tell everyone its all stock dodge... it would be the truth! t

02-10-2009, 05:32 AM	#14 (permalink)
Commando Mopar Lover Join Date: Nov 2007 Location: New Jersey Posts: 935 Thanks: 0 Thanked 0 Times in 0 Posts	Bob, that would be awesome, if I had the money I would do something like that, or put it in my jeep.

03-17-2009, 07:07 AM	#15 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	anyone interested? __________________ liukang187@yahoo.com

03-17-2009, 07:26 AM	#16 (permalink)
68 Sat Mopar Fanatic Join Date: Oct 2008 Location: Northern New Jersey Posts: 221 Thanks: 0 Thanked 1 Time in 1 Post	viper v10 Can I drop that engine into a B Body 1968 Satellite? Are you interested in selling the tranny seperately?

12-02-2010, 08:29 AM
MoparForums 1970 Dodge Challenger Paid Advertisement

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tranny Problems '73 Barracuda 318	ProEmaster	General Technical Questions	2	02-11-2008 11:23 AM
Willing to Trade	Zach8200	General Discussion	1	02-02-2008 02:31 PM
Viper Roadrunner	71Bird	B-Body	1	02-01-2008 07:58 PM
98 Viper Brake Master Cylinder Question	buttslapper	Do-It-yourself Section	2	10-01-2007 06:32 AM
tranny slipping?	318scamp	General Technical Questions	0	04-20-2007 09:55 PM

04-07-2009, 09:40 AM	#17 (permalink)
Liu Kang Junior Member Join Date: Feb 2008 Location: northeast Pa Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	this is still for sale, not sure if it will fit into a B body but pretty sure it will, you may need to do some modifcations, I have seen them in E and B bodies. __________________ liukang187@yahoo.com

12-02-2010, 08:29 AM	#19 (permalink)
72Satellite440 New Member Join Date: Oct 2010 Posts: 29 Thanks: 0 Thanked 0 Times in 0 Posts	Is this still available